http://infraredheatinghub.com/en/tags/blowing/ Recent content in Blowing on Infrared Heating Hub Hugo en-us Sun, 24 May 2026 23:07:25 +0800 http://infraredheatinghub.com/en/posts/carbon-blowing-machine-fiber-lamp/ Sun, 24 May 2026 23:07:25 +0800 http://infraredheatinghub.com/en/posts/carbon-blowing-machine-fiber-lamp/ <p><img src="http://infraredheatinghub.com/images/a5cfd5f4046df586315a118432ec9a23.jpg" alt="carbon blowing machine fiber lamp"></p> <h2 id="what-this-lamp-actually-does">What This Lamp Actually Does</h2> <p>Think of the carbon blowing machine fiber lamp as the workhorse of the plastics shop. It’s a purpose-built infrared heater, designed to get PET preforms and parisons warmed up fast before the blowing step. We built it to deliver intense, focused heat right where the process needs it.</p> <h2 id="power-voltage-and-sizekept-real">Power, Voltage, and Size—Kept Real</h2> <p>These lamps typically run on 400V, pulling the current <a href="https://o-yate.net">needed</a> for serious power—often around 2500W—packed into a 300mm tube. That’s how you get high heat <a href="https://goldisgood.com">density</a> in a small space. The result? The polymer heats up quickly, without turning the rest of the machine into a sauna. The short form keeps it nimble, fitting into tight necks and tooling without a fight.</p> http://infraredheatinghub.com/en/posts/heat-lamp-ir-carbon-fiber-heating-lamp-for-pet-bottle-blowing-machine/ Wed, 06 May 2026 19:09:33 +0800 http://infraredheatinghub.com/en/posts/heat-lamp-ir-carbon-fiber-heating-lamp-for-pet-bottle-blowing-machine/ <p><img src="http://infraredheatinghub.com/images/41283fa63d4a5a768caffbb2270cce25.jpg" alt="heat lamp ir carbon fiber heating lamp for pet bottle blowing machine"></p> <h2 id="introduction">Introduction</h2> <p>We built these carbon fiber infrared heat lamps for one reason: PET bottle blowing machines. Not just any heater. These are purpose-built. They pack serious heat into a small space, so you get fast, focused warmth exactly where the preform needs it.</p> <h2 id="what-actually-happens-on-the-shop-floor">What actually happens on the shop floor</h2> <p>PET preforms need heat fast—controlled, even, and quick. The goal is to stretch them without scorching. So we run these lamps at 2500W and 400V. That’s a lot of power through a relatively small tube—about 300mm long. The payoff? A tight, predictable hot zone that lines up perfectly with the heating station. It’s high energy, no question. You get instant response and high watt density. But here’s the reality: your machine’s cooling and ventilation have to be ready for the waste heat. If the area around the lamp gets too warm, the lamp runs hotter, and the reflector loses efficiency. Plan for airflow, and keep the lamp socket thermally isolated.</p>